Differences between revisions 35 and 36
Deletions are marked like this. Additions are marked like this.
Line 44: Line 44:
Please note that, if you have already installed the runtime for the [[https://surfer.nmr.mgh.harvard.edu/fswiki/HippocampalSubfieldsAndNucleiOfAmygdala|hippocampal subfield / amygdala module]] , you do not need to install it again. Please note that, if you have already installed the runtime for the [[https://surfer.nmr.mgh.harvard.edu/fswiki/HippocampalSubfieldsAndNucleiOfAmygdala|hippocampal subfield / amygdala module]] or the [[https://surfer.nmr.mgh.harvard.edu/fswiki/HippocampalSubfields|FS6.0 subfield module]], you do not need to install it again.

Brainstem Substructures

This functionality was introduced in FreeSurfer 6.0

Author: Juan Eugenio Iglesias

E-mail: iglesias [at] nmr.mgh.harvard.edu

Rather than directly contacting the author, please post your questions on this module to the FreeSurfer mailing list at freesurfer [at] nmr.mgh.harvard.edu

If you use these tools in your analysis, please cite:

See also: HippocampalSubfields, LongitudinalHippocampalSubfields, HippocampalSubfieldsAndNucleiOfAmygdala

Contents

  1. Motivation and General Description
  2. Installation
  3. Usage
  4. Gathering the volumes from all analyzed subjects
  5. Frequently asked questions
  6. Test data


1. Motivation and General Description

This tool generates an automated segmentation of four different brainstem structures from the input T1 scan: medulla oblongata, pons, midbrain and superior cerebellar peduncle (SCP). We use a Bayesian segmentation algorithm that relies on a probabilistic atlas of the brainstem (and neighboring brain structures) built upon manual delineations of the structures on interest in 49 scans (10 for the brainstem structures, 39 for the surrounding structures). The delineation protocol for the brainstem was designed by Dr. Adam Boxer and his team at the UCSF Memory and Aging Center, and is described in the paper.

Here are sample segmentations produced by the algorithm.


samples.png

2. Installation

The brainstem module requires the Matlab R2012b (FreeSurfer 6.0 and dev versions until December 2017) or Matlab R2014b runtime (dev versions from January 2018 on); these runtimes are free, and therefore NO MATLAB LICENSES ARE REQUIRED TO USE THIS SOFTWARE. Please note that, if you have already installed the runtime for the hippocampal subfield / amygdala module or the FS6.0 subfield module, you do not need to install it again. Instructions for the installation of the runtime can be found here:

https://surfer.nmr.mgh.harvard.edu/fswiki/MatlabRuntime


3. Usage

In FreeSurfer 6.0, you need to add the flag -brainstem-structures to your recon-all command. For example, to analyze subject "bert", you would type:

recon-all -all -s bert -brainstem-structures 

Or, if Bert has already undergone the FreeSurfer pipeline (recon-all -all), you can just run:

recon-all -s bert -brainstem-structures 

In more recent development versions (from August 31st 2017 on), this module is called independently from recon-all:

segmentBS.sh bert  [SUBJECTS_DIR]

where the second argument is optional, and can be used to override the FreeSurfer subject directory. Bear in mind that the subject at hand ("bert" in this case) needs to have been processed with recon-all first (e.g., recon-all -all -s bert).

Both in 6.0 and in the development version, the output will be in the subjects mri directory, in this case:

$SUBJECTS_DIR/bert/mri

In this directory, you will find the following three files (where "v1x" is "v10" in FreeSurfer 6.0, or "v11"/"v12" more recent development versions):

brainstemSsLabels.v1x.mgz: the volume with the segmentation at 0.333 mm resolution.

brainstemSsLabels.v1x.FSvoxelSpace.mgz: discrete segmentation in the voxel space of the other FreeSurfer volumes (nu.mgz, aseg.mgz, etc).

brainstemSsVolumes.v1x.txt: a text file with the volumes of the brainstem structures and of the whole brainstem, in cubic mm.


4. Gathering the volumes from all analyzed subjects

Once this module has been run on a number of subjects, it is possible to collect the volumes of the brainstem from all the subjects and write them to a single file - which can be easily read with a spreadsheet application. To do so, one would run:

quantifyBrainstemStructures.sh <output_file> <subject_directory>  

The first argument corresponds to the text file where the table with the volumes will be written. The fields are separated by spaces. The second argument corresponds to the FreeSurfer subjects directory that we want to analyze. This second argument is not necessary if the environment variable SUBJECTS_DIR has been defined.


5. Frequently asked questions (FAQ)

  • Are you sure that this software does not require Matlab licenses? Why does it require the Matlab runtime, then?

The software uses compiled Matlab code that requires the free runtime, but no licenses. So, if you have a computer cluster, you can run hundred of segmentations in parallel without having to worry about Matlab licenses. And yes, this is all perfectly legal ;-)

  • The sum of the number of voxels of a given structure multiplied by the volume of a voxel is not equal to the volume reported in brainstemSsVolumes.v1x.txt.

This is because the volumes are computed upon a soft segmentation, rather than the discrete segmentation in brainstemSsLabels.v1x.mgz. This is the same that happens with the main recon-all stream: if you compute volumes by counting voxels in aseg.mgz, you don't get the values reported in aseg.stats.

  • The size of the image volume of brainstemSsLabels.v1x.mgz (in voxels) is not the same as that of norm.mgz or the additional input scan.

The segmentation brainstemSsLabels.v1x.mgz covers only a patch around the brainstem, at a higher resolution than the input image. The segmentation and the image are defined in the same physical coordinates, so you can visualize them simultaneously with:

cd $SUBJECTS_DIR/<subject_name>/mri/

freeview -v nu.mgz -v brainstemSsLabels.v1x.mgz:colormap=lut  

The software also produces brainstemSsLabels.v1x.FSvoxelSpace.mgz, in case you need a segmentation in the FreeSurfer voxel space (e.g., to create masks for subsequent analyses).

  • I have longitudinal data for a number of subjects. Is there a way of segmenting their brainstem structures in a longitudinal fashion?

At this point, we have not tested or implemented any specific longitudinal segmentation methods for the brainstem structures. That said, if you process the subjects with the main FreeSurfer longitudinal stream, you can run the brainstem module on the longitudinally processed time points (rather than the cross-sectionally processed counterparts), which improves the robustness and sensitivity of the analysis, see for instance this article.

  • I am interested in the soft segmentations (i.e., posterior probabilities), can I have access to them?

Yes. All you need to do is to define an environment variable WRITE_POSTERIORS and set it to 1. For example, in tcsh or csh:

setenv WRITE_POSTERIORS 1 

Or, in bash:

export WRITE_POSTERIORS=1

Then, the software will write a bunch of files under the subject's mri directory, with the format: posterior_<substructure>_v1x.mgz

  • This module is CPU hungry

Indeed! The deformation of the atlas towards the input scan(s) is parallelized, and uses by default as many threads as available cores. If you want to limit the number of cores / threads that are used, you can do that through the environment variable ITK_GLOBAL_DEFAULT_NUMBER_OF_THREADS. For example, to use two cores (tcsh/csh):

setenv ITK_GLOBAL_DEFAULT_NUMBER_OF_THREADS 2

Or, in bash:

export ITK_GLOBAL_DEFAULT_NUMBER_OF_THREADS=2
  • The volume of the whole brainstem obtained with this module is not equal to the value reported by the main FreeSurfer pipeline in $SUBJECTS_DIR/<subject_name>/stats/aseg.stats.

Yes! There are two reasons for this. First, the volumes correspond to two different analyses. And second: the anatomical definitions of the brainstem are (particularly in the midbrain) are different in the original FreeSurfer protocol and the UCSF protocol used by this module.

  • (Only applies to FreeSurfer 6.0 and older dev versions) I ran recon-all -all -brainstem-structures and, after running for hours, the code stopped because I had not installed the Matlab runtime. Do I need to rerun everything?

No! You can just run recon-all -brainstem-structures (that is, without the -all). Of course, that would be after installing the runtime.


6. Test data

Processed data of a single subject (also used to demo the hippocampal subfield segmentation) is available here:

wget -c ftp://surfer.nmr.mgh.harvard.edu/pub/data/hipposubfields-testdata.tgz

The data is extracted with:

tar zxvf hipposubfields-testdata.tgz

Note: within the Martinos Center, this data is found here, but should not be modified (make a copy) as it is used for testing:

/autofs/cluster/freesurfer/subjects/test/hipposubfields

The data is one subject from the ADNI dataset, is fully recon-d. The commands used to produce the brainstem data was:

recon-all -s ADNI_135_S_4863_20-Feb-2013 
segmentBS.sh ADNI_135_S_4863_20-Feb-2013

To view the data:

cd hipposubfields/ADNI_135_S_4863_20-Feb-2013/mri
freeview -v nu.mgz -v brainstemSsLabels.v12.mgz:colormap=lut

BrainstemSubstructures (last edited 2023-11-20 13:18:20 by JuanIglesias)